BreitlingSuperocean 42mm Ref AB2010 Watch

Q: What is the Breitling Superocean 42mm Ref. AB2010?
A: It’s a Swiss‑made diver’s watch in stainless steel with a 42mm case, a blue dial with date, and a blue unidirectional timing bezel. It features a chronometer‑certified automatic movement and comes on a green canvas strap with leather details and a pin buckle—combining sporty capability with everyday versatility.

Q: Which movement does it use and what is the power reserve?
A: The Superocean 42 in this era typically houses a COSC‑certified automatic calibre. Around 2010 many AB2010 models used Breitling Calibre 17 (ETA 2824‑2 base) with roughly 38–42 hours of power reserve; later “Héritage II” pieces use the B20 with about 70 hours. Contact us and we’ll confirm the exact calibre and reserve for this specific watch.

Q: Is it water‑resistant and suitable for swimming or diving?
A: Superocean models of this type were originally rated to 200m, making them suitable for swimming and recreational diving when new. As a pre‑owned watch, water resistance cannot be guaranteed without fresh gaskets and a recent pressure test. We recommend avoiding submersion unless it has been professionally re‑sealed and tested; always ensure the crown is fully screwed down before any contact with water.

Q: How do I set the time and date safely?
A: Unscrew the crown anti‑clockwise. Position 0: manual wind (20–40 turns if the watch has stopped). Position 1: quickset the date. Position 2: set the time. Avoid changing the date between about 8pm and 2am to protect the mechanism. When finished, push the crown in and screw it down snugly to maintain protection against moisture.

Q: How is the unidirectional bezel used?
A: Rotate the bezel counter‑clockwise to align the zero marker (triangle) with the minute hand. The minute hand then indicates elapsed minutes against the bezel scale—useful for timing dives or everyday tasks. Do not attempt to turn the bezel underwater unless the watch has been recently pressure‑tested and certified water‑tight.

Q: What crystal and bezel materials does it have?
A: Superocean models of this era typically use a scratch‑resistant sapphire crystal. The blue bezel insert may be aluminium on earlier versions and ceramic on later “Héritage II” pieces. If you’d like us to confirm the exact specification on this watch, just ask and we’ll verify it for you.

Q: Will it fit my wrist, and can I change the strap?
A: This piece fits a wrist up to approximately 21cm as listed, and the pin‑buckle strap is easily adjustable. Strap changes are straightforward; this model family commonly uses a 22mm lug width (we can confirm exact width and advise on OEM or aftermarket rubber, leather or bracelet options).

Q: Is the canvas/leather‑detailed strap suitable for water use?
A: Canvas with leather backing is not ideal for prolonged water exposure as it can absorb moisture and wear prematurely. For swimming or diving, we recommend a rubber strap or stainless‑steel bracelet, and ensuring the watch has been recently pressure‑tested.

Q: What accuracy should I expect, and how often should it be serviced?
A: As a COSC‑certified chronometer in healthy condition, it should keep time within chronometer tolerances, though performance varies with age and service history. A full service every 5–10 years is generally advised, or sooner if you notice running fast/slow, reduced power reserve, condensation, or compromised water resistance. Keep it away from strong magnets and extreme temperatures.

Q: What’s included, and how do you guarantee authenticity and after‑sales support?
A: Please refer to the Accessories section for what’s included; this listing is delivered with a watch pouch as stated unless otherwise noted. A Retro Tale authenticates every watch and provides a 12‑month mechanical guarantee, free insured DHL shipping, a 14‑day return policy, and 0% customs fees for EU buyers. We own all watches we list and are happy to share additional photos or confirm reference and movement details on request.